PREMIUM PACKAGE @ Rs.1900.00/Sft

1.         DESIGNS & DRAWING WORK.

1.       2D Floor Plan. (2 Options) 

2.       2D Elevation. 

3.   3D Elevation.

4.       Electrical Drawing.

5.       Plumbing Drawing.

6.       Furniture Layout.

7.     Working Drawing.

8.     Interior Layout.

2.         Earth Work.

1.        Excavation for footing columns.

2.        Refilling for foundation and footings & below flooring with excavated earth including watering, compacting & consolidating.

3.        Carting away Excavated surplus earth from site.

4.        Carting away debris.

3.         CONCRETING.

1.        Providing and laying PCC 1:3:6 using 20mm graded granite aggregate below the footing and flooring including normal ramming, compacting and curing.

2.        P.C.C.1:2:4 using 3/4″ graded granite aggregate for Windows sills  etc. including necessary form work and curing, etc., complete.

3.        Providing & casting RCC1:1½:3 with 20mm graded granite aggregate for column Footings, Columns, Staircase, Lintels, Sun Shades, Roof Beams, Roof Slab.

4.    Providing & casting RCC1:1 1/2:3 with 3/4″ graded granite aggregate for chajjas, lofts, Sills, shelves and the like of average thickness of 3″.

4.         MASONRY.

1.        Size stone masonry in C.M. 1:6 for foundation and basement above ground level with stones laid in horizontal course not less than 8″ high, upto 4 courses masonry including curing etc., complete.

2.        Providing and Constructing 8″ thick Block masonry work in CM1:5 with Good quality Brick including racking out of joints necessary scaffolding, curing etc. complete. (For External) (Basic Price of Block Rs.42.00- per Block)

3.        Providing and Constructing 6″ thick Block masonry work in CM1:5 with Good quality Brick including racking out of joints necessary scaffolding, curing etc. complete. (For Parapet) (Basic Price of Block Rs.35.00- per Block)

4.        Providing and Constructing 4” thick Block masonry work CM 1:4 with including supplying and providing 2 Nos 8mm dia M.S. rods as reinforcements in every 4th course including racking out the joints, necessary scaffolding and curing etc. complete. (For Internal) (Basic Price of Block Rs.28.00- per Block)

5.         IRON AND STEEL WORKS.

1.        Supplying, fabricating and tie in position MS/HT 8mm to 20mm diameter reinforcement in RCC items including necessary cutting, cranking, tying with 15 gauge binding wire and all lead and lift charges etc., complete. (Basic Price of steel  Rs.45,000- per M.T)

2.        Providing and fixing 12mm M.S Bright rod Grills for windows and ventilators as per architectural design.

3.        Providing and fixing M.S Railing for Staircase as per architectural design.

4.        Providing and fixing S.S Railing for Balcony as per architectural design.

5.        Providing and fixing M.S Gate as per architectural.

6.         PAVINGS / FLOORING.

1.        Providing and laying Vitrified tiles 2′-0″X2′-0″ size of approved make and colour for flooring laid in C.M.1:5 3/4″ to 1″ thick bed including grouting the joints with grouting powder to match the tile. (Living, Dining, Kitchen) (Basic price of tile for  Rs.50/-per Sft)

2.        Providing and laying ceramic tiles of approved quality size and shade for Toilet flooring laid in C.M.1:5, 3/4″ thick bed including grouting the joints with grouting powder to match the tiles. (Basic price of tile for  Rs.45/-per Sft)

3.        Providing and fixing ceramic glazed tiles for dadoing up to 7′-0″ height using tiles of approved quality, size and shade set on C.M.1:4 3/4″ thick backing including grouting the joints with grouting powder to match the tile. (For toilets)  (Basic price of tile for Rs.45/-per Sft)

4.        Providing Staircase flooring with 19mm thick machine cut granite slab laid on C.M.1:5 bed of 3/4″ to 1″ thickness and the joints grouted with grouting powder. Tread with bull nosing. (Basic price of granite 80Rs/-per Sft).

5.        Providing and fixing ceramic glazed tiles above the kitchen counter 2′-0″  to 4’-0” Height using tiles of approved quality, size and shade set on C.M.1:4 3/4″ thick backing including grouting the joints with grouting powder to match the tile.(For Kitchen) (Basic price of tile for  Rs.50/-per Sft)

6.        Providing and fixing black granite kitchen platform 30mm thick with highly polished on all exposed surfaces. (Kitchen)

7.        Providing and laying ceramic Vitrified tiles 1′-0″X1′-0″ size of approved make and colour for flooring laid in C.M.1:5 1″ to 1½” thick bed including grouting the joints with grouting powder to match the tile. (For Car Balcony) (Basic price of tile Rs.50/-per Sft)

8.        Providing and laying ceramic Vitrified tiles 1′-0″X1′-0″ size of approved make and colour for flooring laid in C.M.1:5 1″ to 1½” thick bed including grouting the joints with grouting powder to match the tile. (For Car parking) (Basic price of tile Rs.50/-per Sft)

7.         CARPENTRY AND JOINER

1.        Providing and fixing 6”X3” African Teak wood frame. The shutter of ready made Teak wood fully panel door shutter. (Main doors)

2.        Providing and fixing 5″x3″ salwood door frames with 32mm thick Masonite door shutter (Niki Make). (Internal Doors)

3.        Providing and fixing 5″x3″ salwood door frames with 32mm thick Masonite door shutter (Niki Make). (Toilet Doors) (With Cylindrical Locks with S.S Hinges)

4.        Providing and fixing UPVC window for bedroom and living and Kitchen. (Basic price of UPVC Rs.400/-per Sft)

 

5.        Providing and fixing UPVC louver ventilators. (Basic price of UPVC Rs.400/-per Sft)

8.         PLASTERING.

1.        Providing and laying 1/2″  to 3/4″ plaster in CM 1:4 to ceiling of slabs including hacking the surface & finishing with a thin slurry of lime

2.        Providing & laying 1/2″to 3/4″plaster in cm 1:6 to Block masonry wall etc, after preparing the surface including finishing with a thin slurry of lime (Internal plastering).

3.        Providing & laying 1/2″ to 3/4″plaster in CM    1:6 to brick masonry, RC works, stone masonry, etc. After preparing the surfaces including finishing surfaces with sand finishing – sponge finish. (External plastering)

9.         WATERPROOFING

1.        Water proofing with1:2:4 Concrete mix using 6mm graded granite aggregate with required slope in Terrace.

2.        Prepare the surface and plastering with 1/2″to 3/4″ thick in C.M.1:4 with water proof additive at 2% by wt., of cement including curing, etc, complete. (Toilets)

10.         PAINTING AND DECORATION

1.        Preparing the surface by sand papering, applying one coat of oil-based primer, two coats of putty and two coats of Premium Emulsion of approved quality and make etc., complete. (Asian paints) (Internal Ceiling).

2.        Providing and Painting of internal wall with sand papering the surface applying one coat of primer, two coat of filler/putty and applying 2 finishing coats of Premium Emulsion paint, with approved shade. (Asian paints) (Internal Walls)

3.        Painting External Walls with Apex approved make and shade thoroughly cleaning the surface, removing loose burrs, dusts, holes, cracks, etc., washing and wetting the surface with sprayer applying one coat of white cement and 2 coats of painting, with approved shade. (Asian paints) (External Walls)

4.        Preparing the surface by sand papering to wood work, applying one coat of filler and two coats of Melamine spray polish. (Main Door)

5.        Preparing the surface by sand papering, applying one coat of primer & putty and two coats of synthetic enamel paint satin finish of approved quality and make, etc., complete. (Internal Doors)

6.        Preparing the surface by sand papering, applying one coat of red oxide primer and two coats of synthetic enamel paint of approved quality, shade and make, etc., complete. (Grills,Railings)

11.         PLUMBING AND SANITARY WORK.

1.        PVC Pipes :             Supreme,Ashirvad,Astral

2.        CPVC Pipes : Supreme,Ashirvad,Astral

3.        CP Fittings:   jaquar continental

4.        W.C Any Modules.  (Cost upto Rs.10000.00)

5.        Divertor for shower and tap (Cost upto Rs.5000.00)

6.        Washbasin              (Cost upto Rs.4000.00)

7.        Provision for Geyser connections with stop cocks.

8.        Washing machine inlet and outlet points at the appropriate locations.

9.        Sanitary Chambers as necessary.

10.     Kitchen Sink:          S.S Sink 24″x24″.

12.         ELECTRICAL WORK.

1.        Wiring  :- Finolex, Havels, Anchor roma (1.0sqmm. for Lighting and 4 sqmm. for Heating).

2.        Switches and Plates :-  Anchor roma, GM or Hi-fi.

3.        Concealed electrical wiring through PVC conduit.

4.        Distribution Box for each house and Anchor roma make.

5.        Electrical arrangements for sump.

6.        Number of electrical points in each house – As per architect drawings.

7.        Separate circuit for Power (Gyser, AC, Fridge, Oven, Heater etc.)

8.        Provisions for UPS. 

13.         Miscellaneous Works.

1.        Parapet wall 3′-6″ Feet height.

2.        Sump tank 8000.00 Liters with 9” thick Brick Masonry with necessary mesh works

3.        PVC Overhead tank 2000.00 Liters (Tribble Layer tank) 

14.         OWNER SCOPE.

 1.        Departmental works like (Sanctioning of plan, Temporary power supply connection, Road cutting permission and Pro-rata charges should be take care by owner.

2.        Monthly Temporary power supply should be take care by owner.

3.        Cauvery Water supply for construction.

4.        If any incontinent happens in site like (Police, Corporation people) owner should take care.

5.        Solar, Geyser, Mirror, Soap holder, Towel rod, Door back hanger hook etc. for the Toilets/Bathrooms shall be borne by the BUILDING OWNERS.

6.        All Interior works and Plaster of Paris (POP) works (if any) will be borne by the BUILDING OWNERS.

7.        The BUILDING OWNERS shall purchase all the Electrical fixtures like (Ceiling Fans, Lights, Exhaust fans, Calling bell).

8.    The Automatic Water level controller cost shall be borne by the BUILDING OWNERS.

COMPLETED PROJECTS

Open chat
Hi, How can i help you?
Powered by